This topic has been archived. It cannot be replied.
-
工作学习 / 事业与工作 / 本人干电子线路板测试8年，会焊单面板，双面板，多层板，SMT，及修板，现在就是英语不大灵光，来了半年，听人说焊板还可以赚点银自，不知有没有朋友知道这方面的消息，先谢过！！
-keepdoing(好心情);
2002-12-2
(#890333@0)
-
赚点银子！！见笑！
-keepdoing(好心情);
2002-12-2
(#890334@0)
-
你不是都可以有手焊吧？只是好奇。
-longshot(懂的不多，想的不少。);
2002-12-2
(#890349@0)
-
是的，可以手焊，但以前只是修板，不是整块板都手焊。因为调试时，有不好的元件都是自己动手换。
-keepdoing(好心情);
2002-12-2
(#890522@0)
-
要是那些板子都手焊，工业自动化不就倒退了。只想说明自己手艺不错。
-keepdoing(好心情);
2002-12-2
(#890533@0)
-
try www.jobbank.gc.ca
-longshot(懂的不多，想的不少。);
2002-12-2
(#890798@0)
-
谢谢！！
-keepdoing(好心情);
2002-12-2
(#890908@0)
-
It is very interesting to repair some boards. But that kind of tech is now just as cheap as cleaners :( I like the feeling of melting an IC using powerful HeatersAre you a Fa1 Shao1 You3?
Now the tech became more and more simpler, even simpler than IT la!
Haha
To check a diode, just use the meter's diode function to listen the BEEP.
To check a triode, the same, just don't confuse of the PnP and NpN
IC is even simpler. Check all AC first then Test the signal
Sometime even don't need any signal analyser, a handy meter will be ok.
One day every tech things will be turned to be cheap.
:-)
-hillman(山大王);
2002-12-3
{444}
(#891305@0)
-
你的技术在Celestica(大概这样拼)和ATI之类的公司可找到吃的, 意思是电路板应该是高科技类的产品.. 我就曾需要焊下248脚的IC更换.
-back(我想归去,可是..哪里?);
2002-12-3
(#892324@0)
-
248个腿要用吸锡器才好办，要不会伤芯片，焊盘。谢谢，我到那投过表，没有下文。
-keepdoing(好心情);
2002-12-3
(#892430@0)