本文发表在 rolia.net 枫下论坛Fog lamps are designed to emit a diffuse beam of light with a wide beam pattern that has the potential to seriously dazzle other road users, particularly if they are not installed in a dipped position. The proposed rule contains a provision that would prohibit the use of fog lamps for purposes for which they are not intended (i.e. in conditions other than severely reduced visibility).
------------------------------------------------
© Copyright 2002 - Royal Canadian Mounted Police - Vancouver Island Traffic Services
Fog and Driving Lights
What is the difference between fog lights and driving lights and what are the requirements for them?
Here is everything you ever wanted to know on that subject!
Fog Lamps
Identifier: SAE + F + Part number on lens
Number permitted: 2
Color: amber or white
Maximum height: below the center of the headlamps
Minimum height: 30 cm. below the center of the headlamps
Wiring: must permit simultaneous operation of tail, parking, license & clearance lamps.
Aim: adjusted and aimed so that, at a distance of 8 m from the lamp, the centre of the beam is at least 10 cm below the height of the fog lamp. Symmetric lamps: ± 150 mm either side of vertical. Asymmetric lamps: ±100 mm either side of vertical
Driving Lamps
Identifier: SAE + Y + part number on lens
Number permitted: 2
Color: white
Maximum height: 106 cm.
Minimum height: 40 cm.
Wiring: to high beam side of dimmer switch
Aim: the high intensity portion of the beam is, at a distance of 8 m from the lamp, at least 12 cm below the height of the lamp and, at a distance of 25 m from the lamp, not higher than 1.06 m from the road surface. Lateral aim ± 150 mm either side of vertical.更多精彩文章及讨论,请光临枫下论坛 rolia.net
------------------------------------------------
© Copyright 2002 - Royal Canadian Mounted Police - Vancouver Island Traffic Services
Fog and Driving Lights
What is the difference between fog lights and driving lights and what are the requirements for them?
Here is everything you ever wanted to know on that subject!
Fog Lamps
Identifier: SAE + F + Part number on lens
Number permitted: 2
Color: amber or white
Maximum height: below the center of the headlamps
Minimum height: 30 cm. below the center of the headlamps
Wiring: must permit simultaneous operation of tail, parking, license & clearance lamps.
Aim: adjusted and aimed so that, at a distance of 8 m from the lamp, the centre of the beam is at least 10 cm below the height of the fog lamp. Symmetric lamps: ± 150 mm either side of vertical. Asymmetric lamps: ±100 mm either side of vertical
Driving Lamps
Identifier: SAE + Y + part number on lens
Number permitted: 2
Color: white
Maximum height: 106 cm.
Minimum height: 40 cm.
Wiring: to high beam side of dimmer switch
Aim: the high intensity portion of the beam is, at a distance of 8 m from the lamp, at least 12 cm below the height of the lamp and, at a distance of 25 m from the lamp, not higher than 1.06 m from the road surface. Lateral aim ± 150 mm either side of vertical.更多精彩文章及讨论,请光临枫下论坛 rolia.net